{"id":59988,"date":"2026-07-29T22:21:10","date_gmt":"2026-07-30T05:21:10","guid":{"rendered":"https:\/\/k6hr.com\/?p=59988"},"modified":"2026-07-29T22:21:26","modified_gmt":"2026-07-30T05:21:26","slug":"wifi-ble-lte-realtime-analysis","status":"publish","type":"post","link":"https:\/\/k6hr.com\/index.php\/2026\/07\/29\/wifi-ble-lte-realtime-analysis\/","title":{"rendered":"WIFI \/ BLE \/ LTE Realtime Analysis"},"content":{"rendered":"\n

Ready to Begin Testing<\/h1>\n\n\n\n

The HP ProLiant server is ready to go to work. The hardware and passthroughs are all configured and tested. In case you missed it, here’s what we’ve accomplished so far:<\/p>\n\n\n\n

    \n
  1. HP ProLiant ML350P Rescued and Refurbished<\/li>\n\n\n\n
  2. Proxmox Virtual Environment v9.2.5<\/li>\n\n\n\n
  3. O\/S Installation: Ubuntu\/Windows\/KALI\/DragonOS<\/li>\n\n\n\n
  4. Alfa AWUS036ACH WiFi Adapter<\/li>\n\n\n\n
  5. USRP B210 AD9361BBCZ + XC7K325T SDR DEV BOARD<\/li>\n\n\n\n
  6. HackRF Pro 100khz thru 6ghz Transceiver<\/li>\n\n\n\n
  7. MultiTech MTCAPW-L12G2 WiFi Gateway<\/li>\n\n\n\n
  8. PCIe USB 3.0 Serial Bus Adapter [Renesas Chipset]<\/li>\n\n\n\n
  9. Marauder V8 ESP32 WiFi \/ Bluetooth Analyzer<\/li>\n<\/ol>\n\n\n
    \n
    \"\"
    Expanding Radio Capabilities w\/HackRF Pro<\/figcaption><\/figure>\n<\/div>\n\n\n
    First Run: LTE FDD Cell Detected<\/h6>\n\n\n\n

    The LTE CellScanner located this LTE signal quickly. However, the Falcon analyzer was unable to sync the signal. As it turned out, the Falcon software was unable to issue valid changes in RX bandwidth, ending up with just 2.5mhz wide bandpass. Unfortunately, 2.5 mhz bandwidth is nowhere near wide enough to receive\/decode the entire 20mhz wide LTE signal. if we want to work with these types of LTE signals, we need a radio that Falcon can communicate with better in terms of instructions that are compatible with the radio’s hardcoded bandwidth choices.<\/p>\n\n\n\n

    While it’s a bit disappointing, the HackRF radio can still be utilized for WiFi and Bluetooth analysis, as those bandwidths are more manageable by the HackRF native softwares.<\/p>\n\n\n\n

    <\/p>\n\n\n

    \n
    \"\"
    Found our first LTE Cell Site at 2104.9mhz CellID: 306<\/figcaption><\/figure>\n<\/div>\n\n\n

    USRP B210 AD9361 SDR Transceiver<\/h2>\n\n\n\n

    Conclusion<\/p>\n\n\n\n

    Changing LTE frequencies is unlikely to solve this. The likely remedies are:<\/p>\n\n\n\n